Manufacturing

Get information about PTCC's training programs in Welding and Boiler Operations.

Manufacturing 

 

 

 

 

Minnesota All Licenses Boiler Operator Exam Prep Class

“A” license students should take this class at either location listed below and also sign up for the 3-hour turbine seminar at the Sprung Services New Brighton location. (651) 697-0334 ask for Mallory

The 2-day seminar at PTCC or Sprung Services in New Brighton were designed with one purpose in mind - to help you pass your boiler operator exam. Whether you are taking a Minnesota Special Engineer or the Chief "A" licensing exam, this seminar will cover what you need. The state exam is given through the Minnesota Department of Labor and Industry. To register for the exam itself, and to find a location that is closest to you, please go to the MN Department of Labor and Industry website: https://secure.doli.state.mn.us/license/initialapp.aspx

You are guaranteed to pass! Although our instructors (employed by Sprung Services) have an extremely high pass rate (about 96%). you will be allowed to retake the class AT NO CHARGE if you get less than a passing grade on the state exam (you can take it again at the Pine Technical & Community College location or Sprung’ s New Brighton location, where classes are given more frequently). Sprung Services is the only boiler operations educator in the state offering this type of guarantee.

How qualified are we to teach this class?

The instructors who developed this Prep Class & Teach include:

--Reed Sprung: (teaches occasionally) – Started as a nuclear reactor operator in the navy. CEO of Sprung Services, which is involves in the operations (including consulting) of many hundreds of boiler rooms in Minnesota and throughout the US. Re-wrote much of the state boiler exam bank in 2008. Wrote the exam prep course. Reed has a Chief A license and 35 years of experience.

--Gordy Nordby: Gordy has been teaching boiler operations and maintenance for approximately 20 years. Gordy has over 34 years of experience in the field and currently holds a Minnesota Chief "A" License. Gordy is ASE Certified as a Master Mechanic and Machinist.

-- Bob Hill: Bob is a Minnesota Chief “A" with over 35 years' experience. Bob began his career as a Navy Nuclear Reactor Operator.

Training Outcomes/Program Agenda:

The State will test you on (and the exam prep class covers) the following subjects:

Thermodynamics, Boiler & System Types, Safety Devices, Instrumentation & Controls, Steam Systems, Feedwater Systems. Combustion Theory & Systems, Water Treatment Chemistry, Plant Operations, Plant Maintenance. Code Issues (MN,ASME,NBIC) and Numbers & Calculations.

What This Class is:

This class will help you pass your boiler exam. Some study materials will be provided free of charge, but you should plan to take notes during class.. Other study materials can be purchased via the website.

What this class is not:

Unfortunately, two days is not enough time to prepare you for your exam while teaching all the fundamentals of boiler operations at the same time so you should look at the class as an exam prep only. The exam preparation seminar will cover the information needed to pass your exam. However, if you would like additional study materials, we recommend the following books and/or workbooks:

  • For Special Licenses: Safe Boiler Operations Fundamental s Low Pressure (LP) Boilers LP Boilers Study Guide LP Boilers Answer Key
  • For 2nd C.1st C & Chief C: LP Boilers (Steingress). LP Boiler s Study Guide, LP Boilers Answer Key
  • For 2nd B,1st B & Chief B:High Pressure Boilers (Steingress)
  • For 2nd A 1st A & Chief A: High Pressure Boilers (Steingress),.Stationary Engineering, (Steingress)

Our Facilities:

Our classrooms are designed to promote a comfortable learning environment. Many visual aids are integrated into our curriculum.

Special Note: The state must receive your application 15-20 days prior to your testing date. Download an application from our website by clicking on "licensing" on our home page or following the link: http:// www.doli.state.mn.us/CCLD/Boiler.asp. The address to send the application is located in the upper left hand corner of the application. It is the student's responsibility to get this boiler license application in to the state. Please note you may also complete the DOLI online exam application form to speed up the application approval process. This website also provides information on the rules and regulations of the boiler industry in Minnesota.

Date: Time: Price: Location:
Tuesday & Wednesday, September, 11-12, 2018 8:00am - 4:00pm 275.00 Pine Innovation Center
Tuesday & Wednesday, November, 13-14, 2018 8:00am - 4:00pm 275.00 Pine Innovation Center

Register online by clicking the blue Register for Classes button at the top of this page!

Click here to print brochure.

Contact: Dawn Sandberg at (320)629-5184 or Dawn.Sandberg@pine.edu or Kathy Anderson, (320)629-5176 or Kathy.Anderson@pine.edu

 

SPARK YOUR INTEREST! DEVELOP YOUR SKILLS
IN THE HIGH DEMAND FIELD OF WELDING!
CHECK OUT PTCC’S FAST TRACK TRAINING FOR WELDERS!

 

Basic Welding Training

This course is designed to give the participant knowledge of welding principles and safety considerations. The course will focus on: developing the basics of wire feed; tungsten inert gas (TIG); gas metal arc (MIG); and shielded metal arc (Stick) welding (SMAW). Brazing, oxyacetylene cutting, and applied blueprint reading will also be covered.

After satisfactory completion, participants will also be able to view a blueprint, interpret it, determine types of welds, and perform various fundamental welding functions. 120 Hours

Course Goals for this 120 Hour Basic Welding Course are

  • Demonstrate knowledge of material selection
  • Identify different base materials
  • Demonstrate set-up procedure of equipment
  • Identify basic welding joints
  • Understand the different perimeter settings
  • Demonstrate arc welding set-up
  • Understand the importance of quality weld factors
  • Demonstrate welding exercises
  • Demonstrate oxyacetylene equipment set up
  • Demonstrate welding rod selection
  • Identify parts of a blueprint
  • Understand differences between brazing and welding
  • Demonstrate set-up procedures for (TIG) and (MIG) welding applications
  • Demonstrate an ability to view blueprint, interpret, and visualize the product
  • Determine welds and material required to manufacture it

*A Loan Program may be available to those interested*

More Information Coming Soon!

Contact: Kris Hanson, at (320)629-4568 or Kris.Hanson@pine.edu.

 

Intermediate Welding Training

Gain knowledge of intermediate welding principles & safety considerations to enhance your welding skills for the welding job market. Focus is on wire feed, tungsten inert gas (TIG), gas metal arc (MIG) and shielded metal arc (STICK) welding (SMAW). 120 Hours Pre-requisite is successful completion of Basic/Introductory Welding or by prior approval of Dawn Sandberg.

Course Goals for this 120 Hour Intermediate Welding Course are:

  • Stick welding qualification test for certification
  • Practice vertical up stringer bead with 6010 1/8 diameters
  • Practice vertical up stringer bead with 6010 3/32 diameters
  • Practice vertical up stringer bead with 7018 1/8 diameters
  • Practice vertical cover pass with 7018 1/8 diameters
  • Practice cutting bevels on a steel plate with oxy. acet.
  • Practice cutting bevels on steel pipe with oxy. acet.
  • Practice welding vertical uproot passes with 6010 3/32 diameters
  • Practice welding vertical uproot passes with 6010 1/8 diameters
  • Practice welding vertical up stringer beads with 3/32 & 1/8 7018 rods
  • Practice welding vertical up cover passes with 3/32 & 1/8 7018 rods
  • Practice welding overhead root passes with 3/32 & 1/8 6010 rods
  • Practice welding overhead filler passes with 3/3 & 1/8 7018 rods
  • Practice cutting bevels on different sizes & schedule of pipe
  • Practice welding root passes on a pipe at 45 degree angles with 3/32 & 1/8 6010 rods
  • Practice welding vertical up filler passes on pipes with 3/32 & 1/8 7018 rod at 45 degrees
  • Practice welding cover passes on a pipe with 3/32 & 1/8 7018 rod at 45 degrees
  • Cut test coupons and prepare for bend tests
  • Bend root coupon and face coupon to see if pass or fail condition is apparent

Contact: Kris Hanson at (320)629-4568 or Kris.Hanson@pine.edu.

 

Back to the Top